Parts Of A Range Hood

Follow this guide to discover common range hoods parts and their location.

1. Hood Canopy

The canopy is a large surface that is somewhat the body of the range hood. This area typically comes with the range hood control panel, light bulbs and a grease filter.

2. Duct Cover

Situated above the canopy, the duct cover encloses the venting system and, subject to the model, the duct system for outdoor ventilation. Subject to your kitchen arrangement and model, your duct system could be installed through the wall or ceiling.

3. Vent System

The vent system has the responsibility of drawing odors and smoke out of your kitchen when you are preparing food. This system and its different parts, like the blower, are typically housed inside the duct cover.

4. Control Panel

The control panel is typically situated on the face of the hood canopy and shows all the controls required for operating the blower and lights. Through the controls, you are able to turn the range hood blower and lights on or off, in addition to managing the blower’s fan speed.

5. Lights

Lights on a range hood are typically situated on the lower surface of the hood’s canopy. Apart from clearing the air when you’re preparing your meals, range hoods additionally feature LED lighting for illuminating the stovetop for greater visibility that is going to help you keep a closer eye on your food as they heat.

6. Grease Filter

The grease filter can be located at the bottom of the canopy and has the responsibility for the removal of odors and steam as part of the ventilation process. The filters need to be cleaned routinely for optimum use.

How Do I Know If My Range Hood Is Vented or Not?

The various kinds of range hoods look alike but operate differently. Whereas all range hoods use ventilation for the removal of smoke and grease from the air when you are cooking, the kind of ventilation used varies between hood models — whether ducted or ductless. Convertible models can carry out either kind of venting.

Ducted Hoods

Ducted range hoods vent outwardly, clearing the air by venting outside through ductwork in the wall, ceiling or flooring. This venting is very typical and can be found in just about all range hood styles, specifically canopy hoods, no matter wall-mounted or installed over kitchen islands.

Ductless Hoods

Range hoods that have ductless or re-circulating venting, filter air prior to forcing it back out into your kitchen. A lot of microwave hood combinations and many undercabinet hoods come by default to use this venting approach. Whereas ductless hoods can be installed just about anywhere, they depend on filters that need to be cleaned regularly.

Convertible Hoods

Convertible hoods provide even more adaptability when choosing the type of ventilation you would like to use in your kitchen. Subject to the ductwork in your kitchen, convertible ranges can be configured to either vent outwardly or through air re-circulation. Undercabinet and canopy hoods are the most probable range hood kinds to be convertible.